What about this break? Re: DNC "hack"
Wiki: Break condition
A break condition occurs when the receiver input is at the "space" (logic low, i.e., '0') level for longer than some duration of time, typically, for more than a character time. This is not necessarily an error, but appears to the receiver as a character of all zero-bits with a framing error. The term "break" derives from current loop signaling, which was the traditional signaling used for teletypewriters. The "spacing" condition of a current loop line is indicated by no current flowing, and a very long period of no current flowing is often caused by a break or other fault in the line.
Some equipment will deliberately transmit the "space" level for longer than a character as an attention signal. When signaling rates are mismatched, no meaningful characters can be sent, but a long "break" signal can be a useful way to get the attention of a mismatched receiver to do something (such as resetting itself). Computer systems can use the long "break" level as a request to change the signaling rate, to support dial-in access at multiple signaling rates. The DMX512 protocol uses the break condition to signal the start of a new packet.