QSTRONG
optics please o/
any autist around besides me kek
Do Nothing Democrats
whats the prob anon, lots of people shoot themselves then hide the weapon
member that time 3m made a force field?
3M accidentally invents an electrostatic force field?
This occurred in late summer in South Carolina, in extremely high humidity. Polypropelene (PP) film on 50K ft. rolls 20ft wide was being slit and transferred to multiple smaller spools. The film was taken off the main roll at high speed, flowed upwards 20ft to overhead rollers, passed horizontally 20ft and then downwards to the slitting device, where it was spooled onto shorter rolls. The whole operation formed a cubical shaped tent, with two walls and a ceiling approximately 20ft square. The spools ran at 1000ft/min, or about 10MPH. The PP film had been manufactured with dissimilar surface structure on opposing faces. Contact electrification can occur even in similar materials if the surface textures or micro-structures are significantly different. The generation of a large imbalance of electrical surface-charge during unspooling was therefor not unexpected, and is a common problem in this industry. "Static cling" in the megavolt range!
On entering the factory floor and far from the equipment, Mr. Swenson's 200KV/ft handheld electrometer was found to slam to full scale. When he attempted to walk through the corridor formed by the moving film, he was stopped about half way through by an "invisible wall." He could lean all his weight forward but was unable to pass. He observed a fly get pulled into the charged, moving plastic, and speculates that the e-fields might have been strong enough to suck in birds!
http://www.abovetopsecret.com/forum/thread167814/pg1
Share it when u see it