>>13606509 (lb)
Set up the positioning of Q posts for an 11 x 17 format, if you don't want bleed through since your printing on both sides, rather than use 20# offset (copy paper 2 reams = 1000 sheets), you can use a 60# or 70# offset sheet (book weight).
By your own 11 x 17 sheets, go to your local Fed-X, which used to be Kinko's, then make your copies. They should have a cutter there, cut them in half and there you have 8.5 x 11 sheets, printed on both sides w/minimal cost.
Whatever happened to the sexual activity, that dirt mongers supposedly dug up on Gaetz?
Dat all go away?
There are close to 5k posts, You can prolly average around 6 to 8 posts per page, 2 pages is 1 sheet printed on both sides (front and back) on 8.5 x 11 sheet.
Figure 6 posts per page x 2 = 12 posts per sheet divided by 5,000 = around 416 sheets, if you use 11 x 17 sheets divide 416 by 2 = 208 sheets, cut in half then you'll have 416, 8.5 x 11 sheets.
It's not hard to format the posts, just takes time, at least then you'd have a templet to reference.